Ir Control Settings - Kindermann HDMI Control Basic 4K60 Inbetriebnahme- Und Bedienungsanleitung

7.3.4 IR control settings

Command
IRSTUDY[X].
IRSEND[X].
IRDLY:[XXX].
IRPCS[X].
IROFFINT:[XX].
GIRDLY.
GIRPCS.
GIROFFINT.
31
Function
Learns the IR command from IR remote.
X Description
0 Study IR TV PWR Off
1 Study IR TV PWR On
2 Study IR User
Send the IR commands.
X Descritption
0 Send IR TV PWR Off
1 Send IR TV PWR On
2 Send IR User
Set the sending interval time between IR ON
and IR USER to XXX (default 3s = 003, range of
1 to 180s).
Send the OFF command X time(s).
X Description
0 1 time
1 2 times
Set sending interval of IR OFF to XX
(default 2s = 02, range of 1 to 10s).
Report the sending interval time between IR ON
and IR USER.
Report the sending number of IR OFF.
Report the delay between the two IR
commands.
Feedback/Explanation/Example
IRSTUDY0.
Ready to program the IR OFF com-
mand for the next 10 seconds from
receiving the reply above.
IRSEND0.
Send the OFF command via IR.
IRDLY:003.
Set the delay to 3 seconds
IRPCS1.
Send OFF command 2 times.
IROFFINT:02.
Set the delay between sending the
OFF command to 2 seconds.
IRDLY:003.
The delay between IR ON and IR
USER has been set to 3 seconds.
IRPCS1.
The number of sending the IR OFF
command has ben set to two.
IROFFINT:02.
The delay has been set to 2 seconds.