4. Panel description
4.1 Front panel
No.
Name
1
Power LED
2
HDMI OUT LED
3
SENSOR
4
DISPLAY ON LED
5
DISPLAY OFF LED
6
Set
7
DIP switch
8
FW
1
2
3
4
Description
Illuminates green when power is applied.
Illuminates blue when there is HDMI signal output.
Built-in IR sensor to receive and learn IR signal.
The LED fl ashes blue when the controller is in IR learning mode, and it will
illuminate constant blue after successfully learning the IR command.
The LED fl ashes blue when the controller is in IR learning mode, and it will
illuminate constant blue after successfully learning the IR command.
Press the button to enable IR learning mode.
Please refer to chapter 7.3.5 for more details.
4-pin DIP switch for EDID setting and HDCP mode selection.
Type-A USB port for fi rmware upgrade.
5
6
7
8
22