Dip Switch Operation; Edid Management - Kindermann HDMI Control Basic 4K60 Inbetriebnahme- Und Bedienungsanleitung

6. DIP Switch operation

6.1 EDID management

The EDID (Extended Display Identifi cation Data) is used by the source device to match its video resolution
with the connected display or projector. By default, the source device obtains its EDID from the connected
display. The DIP switch on the front panel can be used to set the EDID to a fi xed value to ensure the
compatibility in video resolution.
The switch represents "0" when in the lower (OFF) position, and it represents "1" while putting the switch
in the upper (ON) position.
Switch 1~3 are used for EDID setting. The DIP switch status and its corresponding setting are shown at the
back of the product.
Switch status
000
001
010
011
100
101
110
111
Note:
• 2-channell: Supports LPCM 2CH.
• Multi-channel: Supports LPCM 8CH, Dolby TrueHD, DTS-HD , Dolby Digital5.1, DTS 5.1, Dolby Digital
Plus.
25
Video resolution
1080P
1080P
3840x2160@30Hz HDR
3840x2160@30Hz HDR
3840x2160@60Hz HDR
3840x2160@60Hz HDR
User-defi ned EDID (Upload the EDID by type-A USB port)
Audio format
Pass Through
2-channel
Multi-channel
2-channel
Multi-channel
2-channel
Multi-channel