Kindermann HDMI Control Basic 4K60 Inbetriebnahme- Und Bedienungsanleitung Seite 30

Command
RS232OFF/+[X]:XXX
RS232OFF/-[X]:XXX
RS232U/+[X]:XXX
RS232U/-[X]:XXX
RS232DLY:[XXX].
RS232PCS[X].
RS232OFFINT:[XX].
GRS232DLY.
GRS232PCS.
GRS232OFFINT.
Function
When not detecting any trigger signal,
automatically send ASCII command XXX to the
third-party device (e. g. projector) whose baud
rate is X.
When not detecting any trigger signal,
automatically send HEX command XXX to the
third-party device (e. g. projector) whose baud
rate is X.
Set the user-defined ASCII command to send
to the third-party device (e. g. projector) whose
baud rate is X.
Set the user-defined HEX command to send to
the third-party device (e. g. projector) whose
baud rate is X.
Set the sending interval time between RS232 ON
and RS232 USER to XXX (default 3s =003, range
of 1 to 180s).
Set the number of RS232 OFF commands send
to X.
X Description
0 1 time
1 2 times
Set sending interval of RS232 OFF to XX
(default 2s = 02, range of 1 to 10s).
Report the sending interval time between RS232
ON and RS232 USER.
Report the sending number of RS232 OFF.
Report the delay between the two RS232 OFF
commands.
Feedback/Explanation/Example
RS232OFF/+3:123abc
Send the ASCII command "123abc"
to the third-party whose baud rate
is 9600.
RS232OFF/-3:30 31 32
Send the HEX command "30 31 32"
to the third-party whose baud rate
is 9600.
RS232USER/+3:123abc
Send the user-defined command
"123abc" to the third-party whose
baud rate is 9600.
RS232USER/-3:30 31 32
Send the user-defined command
"30 31 32" to the third-party whose
baud rate is 9600.
RS232DLY:003.
Set the delay time between RS232
ON and RS232 USER to 3 seconds.
RS232PCS1.
Send the OFF command 2 times.
RS232OFFINT:02.
Set the delay between sending the
OFF command to 2 seconds.
RS232DLY:003.
The delay time has been set to 3
seconds.
RS232PCS1.
The OFF command will be sent two
times.
RS232OFFINT:02.
The delay has been set to 2 seconds.
30