Citizen Systems CT-S601 II Benutzerhandbuch Seite 50

Liner-free model
A dirty print head, platen, or inside of the printer may reduce printing quality or cause
malfunctions. We recommend cleaning the printer periodically (every 10 rolls of the
liner-free label) as shown below.
1. Turn off the power.
2. Press the cover open lever.
3. Open the paper cover. Wait a few minutes until the print head cools.
4. Clean each section of the printer.
Print head
• Use a cotton swab dampened with ethyl alcohol to wipe off any paper dust and
adhesive that is on the surface of the heating element or around the heating
element.
Platen
• Lightly tap the platen with the adhesive side of the labels you are using to remove
anything that is stuck to its surface.
Inside of paper holder
• Remove the dust, paper scraps, and other materials from the paper holder.
• Use a soft cloth dampened with ethyl alcohol to wipe off any adhesive that may be
stuck to the inside of the paper holder.
Top cover paper eject slot
• Use a soft cloth dampened with ethyl alcohol to wipe off any dirt.
Auto cutter fixed blade
• Press the adhesive side of the labels you are using against the fixed blade several
times to remove just the large bits of hardened adhesive.
Thermal head
Auto cutter fixed blade
— 46 —
Paper holder part and around
paper holder
Platen
Top cover paper eject slot