Loading Paper - Citizen Systems CT-S601 II Benutzerhandbuch

3.13

Loading Paper

1. Press the cover open lever while the power is on.
2. Open the paper cover.
3. Load the paper roll so that the printable side of the paper is facing down, as shown
by arrow A.
4. Pull a few cm of paper (at least 5 cm for liner-free labels) straight out in the direction
of arrow B.
5. Close the paper cover in the direction of arrow C until you hear a click. Paper is fed
and cut automatically, if the factory settings are set.
Refer to 5.3 Manual Setting of Memory Switches
— 39 —