Tips For Achieving The Best Cooling Power; Cleaning, Care And Maintenance; Changing The Fuses - AEG BK 6 Bedienungsanleitung

9. Disconnect the car plug (12) from
the 12 V car socket and neatly wind
up the cable.
10. Clean and dry the inside of the
board bar after use. This will pre-
vent mould from forming.
Tips for achieving the best cooling
power
•
Select a well ventilated location for
use, away from sunlight.
•
Allow warm dishes to first cool down
before keeping them cool in the
board bar.
•
Do not open the board bar more than
necessary.
•
Do not leave the board bar open
longer than necessary.
CLEaNING, CaRE
aND
MaINTENaNCE
Minimal care will ensure your device
remains functional for years.
•
Carefully wind the cable when storing
the device. This will help prevent
accidental damage to the cable and
the device.
•
Clean the product with a soft, dry
cloth.
•
Store the machine in a clean, dry
place.

Changing the fuses

a fuse inside the car plug safeguards
the device. This will respond in the
event of a short circuit or voltage peaks
and must then be replaced.
attention!
Do not use higher rated fuses. The elec-
tronics may otherwise be damaged.
3
2
1
1. Unscrew the retaining pin (1) with
the fuse cover (2) from the car plug
(4).
2. Insert a new micro-fuse (3) of the
same rating (see Technical Data).
3. Replace the retaining pin (1) with
the fuse cover (2) in the car plug (4).
English 21
4