Starting The Appliance - Inventum IKI9045FLOW Benutzerhandbuch

STARTING THE APPLIANCE

1. Touch the on/off button to start the appliance. The operation indicator shows 0.
Note:
If you do not select a cooking zone within 20 seconds, the appliance automatically switches off.
USING A COOKING ZONE
Selecting a cooking zone
1. Put a pan on the cooking zone.
2. Touch the selection/timer button of the cooking zone.
3. Use the up button to increase the power level. The operation indicator shows the set power level.
4. Use the down button to decrease the power level. The operation indicator shows the set power level.
Stopping a cooking zone
1. Use the down button to decrease the power level to 0.
Note:
The operation indicator shows H to indicate the cooking zone is still hot.
USING THE BOOSTER MODE
The booster mode provides extra power to a cooking zone.
Note:
The booster mode does not work when you are already using the bridge mode.
Note:
If you select another cooking zone during the booster mode, the power is more than the maximum
available power of the appliance. The booster mode stops automatically.
Starting the booster mode
1. Select a cooking zone.
2. Use the up button to increase the power level until the operation indicator shows P.
The booster mode now works for 5 minutes. After 5 minutes, the power level returns to 9.
Stopping the booster mode
1. Use the down button to decrease the power level. The operation indicator shows the set power level.
USING THE BRIDGE MODE
In the bridge mode you can connect two cooking zones to create a larger cooking zone.
Note:
You cannot use the booster mode during bridge mode.
Note:
Only the two left cooking zones can be connected.
English • 31