Operation Of The Induction Hob - Inventum IKI9045FLOW Benutzerhandbuch

CONTROL PANEL OF THE INDUCTION HOB
(Figure 2)
A Timer display
B Selection button
C Timer indicator
D Up button
Item
Timer display
Selection button
Timer indicator
Up button
On/off button
Down button
Operation indicator
CONTROL PANEL OF THE COOKER HOOD
(Figure 3)
A On/off button
B Down button
C Display
Item
On/off button
Down button
Display
Up button
Timer button
SAFETY PROVISIONS
Pan detection mode
With the pan detection mode, the appliance does not work if you use an unsuitable pan or if the appliance does not
detect a pan on a cooking zone. The operation indicator shows U and it is not possible to increase the power level.
Residual heat indicator
After stopping the appliance, the cooking zones stay hot. If you touch a hot cooking zone this may result in injury.
The operation indicator shows H to indicate the cooking zone is hot. When the cooking zone is cool, the operation
indicator no longer shows H.
4

Operation of the induction hob

The appliance has electronic sensors that activate when you touch the buttons on the control panel. The appliance
makes a sound when a control is touched.
Caution:
Only use pans that are suitable for an induction appliance. Refer to section
PREPARING FOR OPERATION
1. Clean the appliance before operation. Use a damp cloth.
30 • English
E On/off button
F Down button
G Operation indicator
Function
To show the set time.
To select a mode.
To show that a timer is set.
To increase the power level or set time.
To start or stop the appliance.
To decrease the power level or set time.
To show the set power level or the activated mode.
D Up button
E Timer button
Function
To start or stop the appliance.
To decrease the speed or set time.
To show the set speed level, the set time and the
activated mode.
To increase the speed or set time.
To delay stopping the appliance.
'Requirements for pans' .