Stopping The Appliance; Cleaning And Maintenance Of The Induction Hob; Daily Cleaning - Inventum IKI9045FLOW Benutzerhandbuch

USING THE AUTOMATIC SWITCH-OFF MODE
In automatic switch-off mode, the appliance automatically switches off after a set time. During this mode, you can
adjust the speed and manually switch off the appliance.
1. Make sure that the appliance is on.
2. Adjust the speed.
3. Touch the timer button to start the switch-off mode. The display flashes 1.
4. Use the up button to increase the level.
5. Use the down button to decrease the level.
Note:
For an overview of the amount of time for each level, refer to section
6. Touch the timer button to confirm the setting.
The display alternately shows the set speed for 5 seconds (constantly) and the set switch-off level for 5 seconds
(flashing).
Changing the level
1. Touch the timer button.
2. Use the up button or the down button to change the level. The time will resume at 0 minutes.

STOPPING THE APPLIANCE

Note:
Make sure that the appliance operates for 15 minutes after you finish cooking.
1. Touch the on/off button to switch off the appliance.
6

Cleaning and maintenance of the induction hob

DAILY CLEANING

Warning:
Make sure that all cooking zones are cool before cleaning the appliance.
Warning:
When you spill sugar, clean the appliance immediately to prevent burns on the surface. Be careful, the
cooking zones may be hot.
Caution:
Do not use abrasive cleaning agents, spray cans or sharp objects.
1. Lock the appliance.
2. Remove food stains. Use a damp cloth and a mild cleaning agent or a glass scraper.
3. Clean the appliance daily. Use a damp cloth and a mild cleaning agent.
4. Dry the appliance. Use paper towels or a dry tea towel.
5. In case of heavy dirt, clean the appliance with a special cleaning agent suitable for an induction appliance.
34 • English
'Automatic switch-off times'
.