EINHELL BMS 600 Gebrauchsanweisung Seite 7

Anleitung BMS 600 13.11.2001 13:17 Uhr
On/Off switch:
To switch on: Press switch A
Continuous operation: Lock
switch A with locking button B
To switch off: Press switch A
briefly
The speed is varied by applying
more or less pressure on switch A.
You can preselect the speed by
turning the knurled screw in switch
A.
Seite 7
Push the slide switch to posi-
tion 'hammer'. Do not move
this switch until the drill has
stopped!
Please note: This switch
should be in 'drill' position
when drilling holes in tiles.
Push the slide switch to posi-
tion 'drill'. Do not move this
switch until the drill has
stopped!
GB
7