English - Kenwood A935 Bedienungsanleitung

Before reading, please unfold front page showing the illustrations
pusher
feed tube
lid
pulp shield
grater plate
filter
pulp spout
bowl
juice spout
base
clip
safety
Never put your fingers in the feed
tube. Use the pusher supplied.
Fit the clip over the lid before
switching on.
Don't remove the lid until the filter
has stopped.
Don't touch moving parts.
Unplug before fitting or removing
parts or cleaning.
important
Don't process more than 4.5kg
(10lb) at a time. Switch off for 10
minutes between batches.
If pulp stops coming out, switch off
and unclog the bowl.
Citrus fruits will produce bitter juice
because their pith gets processed
too. The Kenwood citrus press
(A995) is recommended for citrus
fruits.
before using for the first time:
dismantle and clean
1 Undo the clip.
2 Remove the lid.
3 Using the top of the pusher, unscrew
the grater – turn clockwise.
4 Remove the filter.
5 Remove the bowl.
6 Wash the parts: see 'Cleaning'.
to assemble and use
your juicer
1 Slot the bowl onto the base – align

English

the tabs with the cut outs in the
base
2 Insert the filter – align the tabs
3 Using the top of the pusher, screw
the grater on anticlockwise
4 Fit the lid
5 Swing the clip up and click shut
6 Slide the pulp shield on
7 Remove the high speed outlet
cover
8 Attach the juicer and turn until
locked on
9 Place containers under the spouts.
preparing food
Remove stones (eg. plums,
peaches, cherries).
Remove tough skins (eg melons,
pineapples, cucumbers, potatoes).
Soft-skinned and other food just
needs washing (eg apples, grapes,
pears, strawberries, cabbage,
carrots, celery, lettuce, parsley,
radishes, spinach).
10 Cut the food to fit the feed tube.
11 Switch to speed 1 and push the
food down with the pusher.
cleaning
Dismantle before cleaning.
Do not wash any parts in your
dishwasher.
Some foods, eg carrot, will discolour
the plastic. Rubbing with a cloth
dipped in vegetable oil helps remove
discolouring.
base
Never immerse in water. Wipe with a
damp cloth, then dry.
other parts
Wash by hand, then dry.
The bottom of your feed tube has
been individually trimmed to fit
perfectly. Because of this, it's slightly
rough – this is normal.
2
.
.
.
.
.
.
.
.