Installation; Electrical Connection - Electrolux SG224 Benutzerinformation

82 www.electrolux.com

INSTALLATION

WARNING!
Read the "Safety Information" care-
fully for your safety and correct op-
eration of the appliance before in-
stalling the appliance.
POSITIONING
Install this appliance at a location where the
ambient temperature corresponds to the
climate class indicated on the rating plate
of the appliance:
LOCATION

ELECTRICAL CONNECTION

Before plugging in, ensure that the voltage
and frequency shown on the rating plate
correspond to your domestic power sup-
ply.
The appliance must be earthed. The power
supply cable plug is provided with a con-
tact for this purpose. If the domestic power
Cli-
mate
class
SN
N
ST
T
To ensure best performance, if the appli-
50 mm
ance is positioned below an overhanging
wall unit, the minimum distance between
the top of the cabinet and the wall unit
must be at least 40 mm. Ideally, however,
the appliance should not be positioned be-
low overhanging wall units.
The ventilation space can be:
• directly above the appliance
• behind and above the top cupboard.
In this case, the space behind the top
cupboard must be at least 50 mm deep.
supply socket is not earthed, connect the
appliance to a separate earth in compli-
ance with current regulations, consulting a
qualified electrician.
The manufacturer declines all responsibility
if the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
Ambient temperature
+10°C to + 32°C
+16°C to + 32°C
+16°C to + 38°C
+16°C to + 43°C