Specifications - Makita DOLMAR AS3835 Betriebsanleitung

ENGLISH (Original instructions)

SPECIFICATIONS

Model:
Overall length (without guide bar)
Rated voltage
Standard battery cartridge
Net weight
(when using BL1815N)
Standard guide bar length
Recommended guide bar length
Applicable saw chain type
(refer to the table below)
Sprocket
Chain speed
Chain oil tank volume
Saw chain and guide bar
Saw chain type
Number of drive links
Guide bar
Saw chain type
Number of drive links
Guide bar
• Due to our continuing program of research and development, the specifications herein are subject to change
without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
WARNING:
Use appropriate combination of the guide bar and saw chain. Otherwise personal injury may
result.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
Read instruction manual.
Wear safety glasses.
with 90PX
with 91PX
Number of teeth
Pitch
Guide bar length
Cutting length
Pitch
Gauge
Type
Guide bar length
Cutting length
Pitch
Gauge
Type
BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,
BL1840B, BL1850, BL1850B, BL1860B, AP-183
46
300 mm
280 mm
46
300 mm
280 mm
Wear ear protection.
Wear a helmet, goggles and ear protection.
Use appropriate protection for foot-leg and
hand-arm.
Do not expose to moisture.
8 ENGLISH
AS3835
443 mm
D.C. 36 V
4.7 kg
4.8 kg
350 mm
300 - 400 mm
90PX
91PX
6
3/8"
0 - 20 m/s
(0 - 1,200 m/min)
3
200 cm
90PX
52
350 mm
330 mm
3/8"
1.1 mm
Sprocket nose bar
91PX
52
350 mm
330 mm
3/8"
1.3 mm
Sprocket nose bar
56
400 mm
375 mm