Installation - Kicker KMTC Benutzerhandbuch

MODEL:
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
The KICKER KMTC Loaded Marine Cans are the perfect way to bring your music out into the marine or
power sports environment. The KMTC65 and KMTC8 come loaded with the KICKER KM65 and KM8 LED
speakers. The injection-molded ABS enclosures are UV treated, splash resistant, and weather resilient.
Mount the KMTC Loaded Marine Cans in your boat or get creative with a pair of them in the garage, on
your 4x4 or Side-by-Side's roll bars, or in any other bar-mounted application.
Model:
Rated Impedance [Ω]
Sensitivity [1W, 1m]
Peak Power Handling [ Watts]
Continuous Power Handling [Watts RMS]
Enclosure Diameter/Width [in, cm]
Enclosure Depth [in, cm]
Enclosure Height (from bottom of roll bar) [in, cm]
Enclosure Height (bracket top to enclosure bottom) [in, cm]

INSTALLATION

Step 1: Determine the location and placement of the KMTC cans onto the pipe or tube to which you are
mounting. Spreading the KMTC Loaded Marine Cans apart will provide better stereo performance, and is
usually preferable. When determining the best locations for mounting, be careful to look for obstacles or
obstructions that could complicate mounting the KMTC. Please keep in mind the routing of your speaker
wires as this can affect where you fi nally mount your cans. You will need to mark and drill a wire routing
hole in the pipe 5/8" (16mm) in diameter. The placement of the hole must line up with the fi nal position
of the lower mounting bracket so that the wiring coming from the lower mounting bracket can be run
through; ie the hole should be 90° from the direction the speakers will be aimed and in-line with the wiring
coming from the lower mounting bracket. If the speakers will be level with the horizon, you should drill a
hole directly in the bottom of the tube.
2
KICKER LOADED MARINE CANS
Owner's Manual
KMTC65 | KMTDC65 | KMTC8
KMTC65
4
90
195
65
7, 17.8
9-11/16, 24.6
8-1/4, 21
10-1/4, 26
KMTDC65 KMTC8
4 4
93 92
390 300
130 150
14-1/16, 35.7 8-3/16, 20.8
9-11/16, 24.6 11-5/16, 28.7
8-1/4, 21 9-7/16, 24
10-1/4, 26 11-1/2, 29.2