Kicker KMTC Benutzerhandbuch Seite 3

Step 2: Thread the speaker and LED wires through the bottom of the lower mounting bracket and out of
the plastic liner hole in the center.
lower mounting bracket
swivel base
IMPORTANT: You must apply a thin layer of the included anti-seize compound to ALL threaded fasteners
before installation.
Step 3: The mounting hardware design provides versatility in angular positioning to direct the speaker's
output to the ideal listening position using the quick adjust swivel lever. With the lower mounting bracket in
place, install the swivel clamp and tightly secure it using the included swivel bolt, making sure the clamp
engages with the groove in the swivel base.
lower mounting bracket
swivel clamp
swivel bolt
3