Installation - Kicker PS series Installationsanleitung

Authorized KICKER Dealer:
Purchase Date:
PERFORMANCE
Woofer Size | in [mm]
Tweeter Size | in [mm]
Frequency Response | Hz
Max Recommended Amplifi er Power [Watts] | PEAK/RMS
Sensitivity [SPLo] | dB @ 1W, 1m
Nominal Impedance [Zn] | ohm
Weight | oz [g]
Mounting Hole Diameter | in [mm]
Mounting Depth | in [mm]
Top Mount Height | in [mm]
Package Contents:
(2) PS4 Speakers
(8) M4 x 25mm pan cross head woodscrews
(4) 22ga, red crimp-style butt connectors
(2) Grilles

INSTALLATION

Please refer to your bike's factory service manual for disassembly/installation information. Typically, you should
retain all factory screws, hardware, and grilles when upgrading your bike to a KICKER system. The KICKER PS4
is compatible with factory locations and 4" or 5" (with adapter plate) audio systems. If you are doing a custom
installation, be careful not to drill into wiring or vehicle mechanisms. You are solely responsible for securely
mounting the speakers. Use the included grilles after performing a custom installation.
2
2013 PS4 Rev C.indd 2 2013 PS4 Rev C.indd 2
PS4 COAXIAL SPEAKERS
Owner's Manual
4 [100]
3/4 [20]
100–20,000
100/50
85.756
2 (40PS42), 4 (40PS44)
11.9 [338]
3 5/8 [93]
1 11/16 [43]
3/4 [19]
(2) 12" wiring harnesses
(8) M4 speed nuts
(2) 4" to 5" Adapter plate
(2) Kicker badges
6/17/2013 5:02:01 PM 6/17/2013 5:02:01 PM