Installation - Kicker PS-Serie Bedienungsanleitung

Authorized KICKER Dealer:
Purchase Date:
Serial Number:
PERFORMANCE
Woofer Size | in [mm]
Tweeter Size | in [mm]
Frequency Response | Hz
Max Recommended Amplifi er Power [Watts] | PEAK/RMS
Sensitivity [SPLo] | dB @ 1W, 1m
Nominal Impedance [Zn] | ohm
Weight | oz [g]
Mounting Hole Diameter | in [mm]
Mounting Depth | in [mm]
Top Mount Height | in [mm]
WARNING: KICKER products are capable of producing sound levels that can permanently damage your
hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than
listening to an undistorted system at the same volume level. The threshold of pain is always an indicator
that the sound level is too loud and may permanently damage your hearing. Please use common sense
when controlling volume.
Package Contents:
(2) PSC65 Speakers
(8) M4 x 25mm pan cross head woodscrews
(4) 22ga, red crimp-style butt connectors
(2) Grilles

INSTALLATION

Please refer to your bike's factory service manual for disassembly/installation information. Typically, you
should retain all factory screws, hardware, and grilles when upgrading your bike to a KICKER system. The
KICKER PSC65 is compatible with factory locations using the included gaskets. If you are doing a custom
installation, be careful not to drill into wiring or vehicle mechanisms. You are solely responsible for securely
mounting the speakers. Use the included grilles and screws only when performing a custom installation.
1. Remove your motorcycle's instrument panel according to the
manufacturer's service manual.
2
2015 PSC65 Rev E.indd 2 2015 PSC65 Rev E.indd 2
PSC65 COAXIAL SPEAKERS
Owner's Manual
6 1/2 [160]
3/4 [20]
40–20k
120W/60W
92.5
2Ω (PSC652), 4Ω (PSC654)
15.2 [430]
5 1/16 [128]
2 [50]
1/4 [6.5]
(2) 12" wiring harnesses
(8) M4 speed nuts
(4) Gaskets
(2) Kicker badges
9/25/2015 8:54:19 AM 9/25/2015 8:54:19 AM