Makita DSC250 Betriebsanleitung Seite 4

ENGLISH (Original instructions)
Before installing and operating this machine, read, understand and follow all
instructions and operating procedures. Keep this Instruction Manual with the
machine.
Read, understand and follow all safety instructions and operating
procedures. If you do not understand the instructions, or if condi-
tions are not correct for proper operation, DO NOT OPERATE THE
MACHINE. Consult your supervisor or other responsible person.
SPECIFICATIONS
Model:
Voltage
Weight
Dimensions (L x W x H)
Cutting Capacity of a rebar
(620 N/mm / 90,000 psi )
2
No load speed
External Diameter of Blade
Battery cartridge
Charger
• Specifications and design may be subject to change without prior notice.
• Specifications and battery cartridge may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
WARNING
Read and understand this instruction manual before
operating this machine. Failure to follow operating
instructions could result in death or serious injury.
WARNING LABELS RELATED TO
SAFETY
Flying debris and loud noise hazards. Wear ear and
eye protection.
Moving blade. Keep hands clear while machine is
operating. Turn power off before servicing.
3.94 - 4.0 kg (8.686 - 8.818 lbs)
471 mm x 137 mm x 139 mm / 18-17/32" x 5-25/64" x 5-15/32" (excluding a handle)
BL1830B / BL1840B / BL1850B / BL1860B
DC18RC / DC18RD / DC18SE / DC18SF / DC18SD
Symbols
The following show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Cd
Ni-MH
Li-ion
4 ENGLISH
DSC250
D.C. 18 V
φ10 to φ25 mm (SD490)
3/8" to 1" (Grade 60)
2200 min
-1
110 mm / 4.3"
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.