Installing Windows - ASROCK P75 Pro3 Handbuch

Downloaded from www.Manualslib.com
2.10 Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from top to bottom to
install those required drivers. Therefore, the drivers you install can work properly.
2.11

Installing Windows

XP / XP 64-bit Without RAID Functions
If you want to install Windows
OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the
procedures below according to the OS you install.
2.11.1 Installing Windows
Functions
If you want to install Windows
HDDs without RAID functions, please follow the steps below.
AHCI mode is not supported under Windows
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE].
STEP 2: Install Windows
28
manuals search engine
® TM
7 / 7 64-bit / Vista
® TM TM
7 / 7 64-bit / Vista / Vista
®
XP / XP 64-bit Without RAID
®
XP / XP 64-bit OS on your SATA / SATA2 / SATA3
®
XP / XP 64-bit.
Advanced screen Storage Confi guration.
®
XP / XP 64-bit OS on your system.
ASRock P75 Pro3 Motherboard
TM
/ Vista 64-bit /
64-bit / XP / XP 64-bit