Air Filter Cleaning (Only For Model Msd/400 - Msd/500); Adjustment Of Pressure Switch - FIMAR MSD/300P Benutz Und Wartungsanleitung

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ PACKAGING MACHINE WITH SEALING BAR MSD

AIR FILTER CLEANING (ONLY FOR MODEL MSD/400 - MSD/500)

1. Remove cup (N).
2. Extract and clean filter with a jet of
compressed air.
3. Install the filter and tighten cup (N).

ADJUSTMENT OF PRESSURE SWITCH

In case of suction problems during the
EN
automatic operation of the equipment, adjust
screw (P) in order to regulate the suction time
of vacuum pump (Use supplied key "Torx
T30").
– Rotate clockwise in order to increase the
suction time of pump
– Rotate anti-clockwise
decrease the suction time of pump
Important
The equipment is already regulated when it is
tested in factory. Carry out this operation only
in case of real need.
in order to
- 14 -
N
MSD/300P - MSD/300
P
MSD/400 - MSD/500
P
English language