FIMAR MSD/300P Benutz Und Wartungsanleitung Seite 37

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ GENERAL AND SAFETY INFORMATION
specific field.
– Do not use the appliance with broken or inefficient power wires. When a defect is found,
immediately stop the appliance in safety conditions and have authorised and qualified
personnel replace wires.
– Before cleaning, maintenance, etc., TURN OFF THE POWER (or unplug the power
cord) and make sure the processing area is fully cooled.
– Clean the appliance after every use or when reasonably needed, also according to the
type of food product processed.
– Accurately clean all appliance parts (including surrounding areas) that can come into
direct or indirect contact with food products to avoid the risk of contamination and
maintain hygiene.
– Only clean the appliance with food safe detergents. Never use corrosive and flammable
cleaning products or products that may contain and/or emit harmful substances.
– Clean and disinfect the appliance wearing personal safety devices especially when
detergents are used.
– Do not clean the appliance under running water to avoid damaging parts, especially
electric and electronic parts.
– In the event of prolonged appliance disuse, clean and thoroughly dry all its parts
(internal and external). Unplug the power cord and make sure the room conditions are
suited to preserve the appliance in time.
– Conditions necessary for correct electrical equipment operations are listed according to
the surrounding environment.
– Room temperature not under 5°C.
– Relative humidity between 50% (at 40°C) and 90% (at 20°C).
– The room must be free of areas with gas concentrations and potentially explosive
powders and/or fire hazards.
– The activity may affect the environment and, for this reason, take air emissions, liquid
discharges and ground contamination, the use of raw materials, natural resources and
waste disposal into account.
– During transport and storage, environmental temperature must be between -25°C and
55°C with a maximum of 70°C as long as exposure is no longer than 24 hours.
– Packaging components must be disposed according to current laws in the country of
use.
– When decommissioning and scrapping the appliance, divide all parts according to their
- 5 -
EN
English language