Contacting Customer Service; Safety Devices - FIMAR MSD/300P Benutz Und Wartungsanleitung

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬ GENERAL AND SAFETY INFORMATION

CONTACTING CUSTOMER SERVICE

Indicate the appliance version and type of defect found when contacting customer service.

SAFETY DEVICES

– During design and construction the Manufacturer has carefully considered all aspects
that could cause possible hazards and personal risks.
– The manufacturer has adopted all the "rules of good construction practice" and
constructed the machine with specifically selected materials to guarantee food hygiene
and working operability.
– The purpose of this information is to inform the user to pay attention to prevent any type
of operating and food risk. However, discretion is invaluable. Safety is also in the hands
of all those who use the appliance (installation technicians and users).
– Carefully read the instructions in this manual and those applied directly on the
EN
equipment; in particular, observe those that pertain to safety.
– Handle the appliance following the information on the packaging, on the appliance and
in the instructions for use.
– During transport, handling and installation, do not hit or drop the appliance to avoid
damaging its parts.
– Personnel authorised to perform power connections must make sure the mains
specifications match those on the plate, that the mains has a circuit breaker and
components in accordance with current laws and regulations.
– Do not tamper with, remove or bypass the safety devices installed on the appliance for
any reason.
– The user should carefully read the entire manual and make sure all parts are
understood, especially all the information concerning safety.
– Upon first appliance use, if necessary, simulate use to identify controls especially power
on and off controls.
– Only use the appliance as intended. Improper appliance use or use other than that
admitted may cause personally safety risks and injuries and economical damages.
– The manufacturer is not liable for any damages due to improper appliance use, failure
to follow the instructions in the user manual and appliance tampering or changes
without official authorisation.
– All work that requires specific technical skills or abilities (installation, power connections,
etc.) must only be performed by authorised personnel with recognised experience in the
- 4 - English language