Seite 1
Product Manual Manuel du produit Produkthandbuch Producthandleiding Manual del producto Manuale del prodotto Instrukcja obsługi Ruční výrobek Ürün Kılavuzu Brukerveiledning Produkthandbok Produktmanual 製品マニュアル 1236855-W2-A...
Seite 2
20 - 38 mm 0 - 20 mm X 2 q X 2 q X 2 q X 1 q X 1 q X 1 q X 1 q X 1 q X 2 q X 2 q X 1 q 1236855-W2-A...
Seite 3
62 mm (2.44”) 155 mm (6.10”) 30° 100 mm (3.93”) 300 mm 1236855-W2-A...
Seite 4
63 mm (2.48”) 195 mm (7.68”) 195 mm 63 mm 221 mm 30° 150 mm 140 mm (5.51”) 140 mm 300 mm 1236855-W2-A...
1000 kPa (10.0 bar) Als het netsnoer beschadigd is mag dit alleen Minimaal aanbevolen 7°C vervangen worden door Kohler Mira Ltd of een door differentieel tussen warme toevoeren en hen erkende service agent. uitlaattemperatuur (consistent...
Seite 6
3.0 mm 7.0 mm 6.0 mm > 34 mm > 34 mm 1236855-W2-A...
Seite 7
3.0 mm 20 - 38 mm 0 - 20 mm 1236855-W2-A...
Seite 8
1 min 100 mm 100 mm 100mm 100mm 100 mm 100mm 1236855-W2-A...
Seite 10
Install the PSU (Power Supply Unit) in an area that you can access easily. Installez l’unité d’alimentation dans une zone facile d’accès. Installieren Sie das Netzteil an einer leicht zugänglichen Stelle. Instale la fuente de alimentación en un área de fácil acceso. Installare l’alimentatore in una zona di facile accesso.
Seite 13
The Rada MX1 faucet will operate to factory settings when first installed. Refer to the Product Manual packed with the ‘Communicator’ if you want to change the factory settings. Le robinet Rada MX1 fonctionnera selon les réglages d’usine lors de la première installation. Reportez-vous au manuel du produit joint au «...
Seite 15
Refit the components in reverse order/ Réinstallez les composants dans l’ordre inverse/ Setzen Sie die Bauteile in umgekehrter Reihenfolge wieder ein/ Volver a montar los componentes en orden inverso/ Rimontare i componenti in ordine inverso/ Plaats de onderdelen terug in omgekeerde volgorde./ Założyć części w odwrotnej kolejności./ Namontujte součásti v opačném pořadí./ Parçaları...