Bose SMART SOUNDBAR 300 Gebrauchsanleitungen Seite 47

SYMPTOM
No audio from
bass module or
surround speakers
Sound is coming from
TV speaker
Poor or distorted audio
Soundbar doesn't play
audio from the correct
source or selects the
incorrect source after
a delay
TR OUBL ES H O OTI N G
SOLUTION
Make sure the soundbar is up to date (see page 42).
Make sure your bass module or surround speakers are
compatible with the soundbar (see page 40).
Make sure the software is current in the Bose Music app.
Adjust the bass level using the Bose Music app
(see page 22).
Switch to a different source (see page 20).
Make sure your HDMI cable is inserted into a port on your TV
labeled ARC (Audio Return Channel). If your TV doesn't have
an HDMI ARC port, connect to the soundbar using the optical
cable (see page 56).
Turn off your TV speakers. Refer to your TV owner's guide.
If the soundbar is connected to your TV HDMI ARC port, make
sure that Consumer Electronics Control (CEC) is enabled in
your TV system menu. Your TV may refer to CEC by a different
name. Refer to your TV owner's guide.
Disconnect your HDMI cable from your TV HDMI ARC port and
reconnect it.
Decrease your TV volume to its lowest setting.
Connect to the soundbar using both your HDMI cable
(see page 55) and the optical cable (see page 56).
Test different sources if available.
Make sure that your TV can output surround sound audio. Refer
to your TV owner's guide.
If the audio is being played from another device, reduce the
volume of that device.
Adjust the bass level using the Bose Music app
(see page 22).
Power off your TV speakers. Refer to your TV owner's guide.
If the soundbar is wall mounted, adjust the audio
(see page 14).
Set CEC to Alternate On using the Bose Music app.
Disable CEC on your source. Refer to the source owner's guide.
Connect to the soundbar using both your HDMI cable
(see page 55) and the optical cable (see page 56).
|
4 7 E N G