Speed Limit; Unit - Zundapp Z901 Betriebsanleitung

8.3 Speed Limit

Short press Plus button at setting interface for shift to speed
limit setting.
Speed limit setting decides the Max.Speed, upon which
controller will cut off motor output to ensure rider's
safety, Speed limit rages from 12km/h to 25km/h. Default
set for speed limit is 25km/h for the display. Short
press ON/FF to choose speed limit setting interface;
short press plus or minus to increase or decrease speed
limit; Then short press ON/OFF button to save and quit.
8.4 Unit setting
Short press plus button at setting interface for shift to unit
setting interface.
Unit setting is valid to set display speed and mileage
unit, right corner position"1" means common setting,
defaulted unit is KM. Short press ON/FF button to choose
unit setting interface. Short press Plus or Minus to
shift between KM/H and MPH; short press ON/OFF again to
save and quit.
BL setting Interface
Speed limit adjustment interface
- 16 -