Targus ACP45EU Benutzerhandbuch Seite 9

installing the Default Device
Drivers
Once you connect the docking station to your computer,
the default drivers begin installing for each of the ports
automatically.
Some hardware devices may prompt you to install the
drivers.
To install the drivers:
1 Select Install the software automatically
2 Click Finish and repeat as needed for each device.
3 Restart your computer.
leD Status indicator lights
Once all device drivers are installed, the USB LED status
indicator lights on the back of the docking station glow
when you connect devices to the docking station.
• Green Tx light illuminates when connected to a
Downloaded from www.Manualslib.com
Targus Universal Laptop Docking Station
NOTE: plEaSE ENSUrE yOU havE ThE laTEST SErvicE packS
iNSTallEd.
(Recommended) and click Next.
The Found New Hardware Wizard program begins
installing the hardware drivers.
The Completing the Found New Hardware Wizard
screen appears.
network and the yellow Rx light flashes when data is
transmitting to or from the network.
NOTE: ThE dOckiNg STaTiON SUppOrTS hOT SWappiNg Of
ThE NETWOrk caBlE.
manuals search engine