Troubleshooting - Targus ACP45EU Benutzerhandbuch

Troubleshooting

Device not Working
• Make sure that the device is fully inserted into the
• Plug the device into a different port on the docking
• Verify that you ran the Setup or Install program for the
• Make sure that the device appears in Device Manager.
• Disconnect all devices from the docking station and
• Each USB port is equipped with over-current
Downloaded from www.Manualslib.com
Targus Universal Laptop Docking Station
correct port on the docking station.
station. If it still doesn't work, test the device by
connecting it directly to your computer.
device.
For more information refer to "Verifying Devices are
Installed".
reconnect them, one at a time. Check that each device
works before plugging in the next one.
protection. Should a USB device draw more current
than the USB port can supply, the port will shut down.
To re-enable the port, unplug the device and go to
Device Manager or to the message in the system
tray and choose the Reset option. You can then
plug the device back into the USB port. If a shut down
reoccurs, check the power requirements of the device.
manuals search engine
1