Targus ACP45EU Benutzerhandbuch Seite 12

connecting a parallel printer
To connect a parallel printer:
1 Attach the cable connector to the parallel port on the
2 Go to Start button of your Window OS, and click on
connecting a pDA
1 Attach the cable connector to the serial port on the
2 Verify that the COM port setting, in either your
connecting to a local Area
network
To connect an Ethernet cable with an RJ-45 connector,
attach the cable connector to the Ethernet/network port
on the docking station. Additional procedures to connect
to an actual network depend on the type of network you
are using. Contact your network administrator for detailed
instructions.
Downloaded from www.Manualslib.com
Targus Universal Laptop Docking Station
docking station.
Printers and Faxes. Add your printer driver by
following the instructions of the Add Printer Wizard.
docking station.
HotSync or ActiveSync
®
on the docking station.
To verify the COM port setting on the docking station,
refer to "Verifying Devices are Installed".
To verify the COM port setting on your PDA, refer to
the documentation that came with it.
manuals search engine
software, matches the setting
®
12