Specifications - AKG MicroMic C 411 III Bedienungshinweise

Type:
Polar pattern:
Frequency range:
Sensitivity at 1 kHz:
Impedance:
Recommended load impedance:
Max. SPL for 1%/3% THD:
Power requirement:
Current consumption:
Cable length/Connector:
Finish:
Size:
Net/shipping weight:
This product conforms to EN 50 082-1 provided it is connected to equipment
with a CE mark.
Frequency Response
Cleaning: To clean the pickup case, use a soft cloth moistened with
water.
Downloaded from www.Manualslib.com manuals search engine

6 Specifications

pre-polarized condenser transducer
figure 8
10 Hz to 18,000 Hz
-2
1 mV/ms (vibration pickup)
200 Ω, unbalanced
≥1000 Ω
96 / 103 dB SPL
C 411 III PP: 9 to 52 V universal phantom power
III
C 411 L: B 29 L battery power supply,
MPA III L phantom adapter,
AKG WMS bodypack transmitters
approx. 2.2 mA
III
C 411 PP: 3 m (10 ft.) / 3-pin male XLR
III
C 411 L: 1.5 m (5 ft.) / 3-pin mini XLR
matte black
27 x 14 x 9.5 mm (1 x 0.6 x 0.4 in.)
III
C 411 PP: 98 g (3.5 oz.) / 225 g (8 oz.)
C 411 III L: 18 g (0.6 oz.) / 150 g (5.3 oz.)
Polar Diagram
21