Specifications - AKG C214 Bedienungsanleitung

5 Specifications

Type:
Polar patterns:
Open-circuit sensitivity:
Frequency range:
Impedance:
Recommended load impedance:
Bass cut filter slope:
Preattenuation pad:
Equivalent noise level to IEC 60268-4 (A-weighted):
Signal/noise ratio re 1 Pa (A-weighted):
Max. SPL for 0.5% THD:
Dynamic range (A-weighted):
Environment:
Powering:
Current consumption:
Connector:
Dimensions:
Net weight:
This product conforms to the standards listed in the Declaration of Conformity. To order a free copy of the De-
claration of Conformity, visit http://www.akg.com or contact sales@akg.com.
28
1-inch large-diaphragm backplate pressure
gradient microphone
cardioid
20 mV/Pa (-34 dBV)
20 to 20,000 Hz (see frequency
response graphs)
≤ 200 ohms
≥ 1000 ohms
6 dB/octave at 160 Hz
0/-20 dB (switchable)
13 dB(A) (0 dB preattenuation)
81 dB
136/156 dB SPL (0/-20 dB)
123/143 dB (0/-20 dB)
temperature: -10°C to +60°C
R.H.: 95% (+20°C); 85% (+60°C)
12 to 52 V phantom power
to IEC 61938
< 2 mA
IEC standard 3-pin XLR
54 x 43 x 160 mm / 2.1 x 1.7 x 6.3 in.
290 g / 10.2 oz.
C 214