AKG MicroMic C 411 III Bedienungshinweise Seite 17

1. Connecting the cable: Push the mini XLR
connector (1) on the pickup cable into the mini
XLR socket (2) on the cable of the MPA III L (3)
to the stop.
The connector will lock automatically.
MPA
Fig. 4: Connection diagram with MPA III L.
Disconnecting the cable: Refer to section
2.3.1 above.
2. Connect the MPA III L (3) to a balanced XLR
microphone input with phantom power.
3. Switch the phantom power on. (Refer to the in-
struction manual of the unit to which you
connected your pickup.)
4. If your mixer provides no phantom power:
Connect the MPA III L (3) to an optional AKG
phantom power supply (4) (N 62 E, N 66 E, B 18,
B 15) and use an XLR cable (5) (e.g., an optional
MK 9/10 from AKG) to connect the phantom
power supply (4) to the desired balanced input.
Refer to the manual of your bodypack transmitter.
Downloaded from www.Manualslib.com
Mini XLR
Phantom
manuals search engine
2 Interfacing
Mini XLR MPA
2.3.2 Using the
MPA III L
Refer to fig. 4.
Refer to fig. 4.
2.3.3 Connecting
to a Bodypack
Transmitter
17