Application Ranges; Classification Of The Acp And Of Its Components According To The Eu Directives - Bitzer ACP8551K-2 Originalbetriebsanleitung

3 Application ranges

Permitted refrigerants
Oil charge
Maximum allowable
pressure (PS)
Tab. 2: Application ranges
Please refer to the compressor brochures SP-510 and
SP-520 for the application limits.
22
R717 (NH )
3
Polyalphaolefin (PAO)
Hydrocracked mineral
oil
Please refer to the
Technical Information
ST-500 to know which
oils are authorized
Discharge side: 24 bar
Suction side: 19 bar
3.1 Classification of the ACP and of its
components according to the EU directives
The ACP is intended for incorporation into machines in
accordance with the 2006/42/EC Machinery Directive.
The electrical components comply with the EU Low
Voltage Directive 2014/35/EU. Moreover, the pressur-
ized components must comply with the EU Pressure
Equipment Directive 2014/68/EU (PED), except for the
compressors (see below). The Declarations of Con-
formity and the Declarations of the Manufacturers are
available.
ACPs are no "functional wholes" as described in the
PED and are therefore not concerned by the applica-
tion range of the "assemblies" (2014/68/EU Art. 2, 6).
The directive applies therefore only to the individual
pressurized components. The same thing applies to the
CE marking.
Assessment by a notified body: Bureau Veritas, Paris –
"Technical Appraisal" for ASERCOM members PED-
TA_ASE_001_01-DEU
Compressors are excluded from the scope of the PED
(2014/68/EU Article 1 (2) j). This exception is confirmed
by the evaluation of a notified body. Please refer to "Ex-
planations about the Product conformity" AP-100 for
further explanations. Please refer to AP-100 for the
classification of pressurized accessories for com-
pressors.
SB-600-2