Handicare SystemRoMedic TopSheet Gebrauchsanweisung Seite 6

English
Turning and hygiene
When the patient has been turned to the
desired position, the Velcro strip can be
loosened behind the patient.
Changing the bottom TopSheet section
Turn the patient on one side (see instructions for turning with TopSheet). Loosen the Velcro strip on the section on which
the patient is lying and tuck it in as far as possible under the patient. Take a new bottom section, fasten it along the
Velcro strip, and tuck it under the patient as far as possible.
Turn the patient back on to his/her back, move the lift to the other side, and turn the patient in the opposite direction.
Remove the bottom section that is to be replaced. Pull the Velcro strip out and fasten the new bottom section to it.
Material:
Polyester, polyamid
Care of the product:
Read the product label.
Do not use rinsing agent. To ensure maximum
material life, hang dry or tumble dry on low heat.
6
Since the TopSheet now supports the
patient's back, the caregiver is free to
attend to the patient's hygiene.
Medical Device Class I
The product meets the requirements of the Medical Devices
Directive 93/42/EEC.
Contact your local distributor if you have any questions
about the product and its use. See www.handicare.com
for a complete list of distributors. Always make sure that
you have the right version of the manual. The most recent
editions of manuals are available for downloading from our
website, www.handicare.com.
SystemRoMedic
M A N U A L
TM