Safety - Atag A Serie Bedienungsanleitung

2

Safety

16
Work on the installation should only be carried out
by qualified personnel with calibrated equipment.
When replacing parts, only ATAG Service
components may be used.
If you smell gas:
- No naked flames! No smoking!
- Do not switch lights on or off or use other
electrical switches.
- Do not use the phone
- Close the gas mains
- Open windows and doors
- Warn the occupants and leave the building
- Only call the gas company or installer once you
are outside the building.
Corrosion protection
Do not use sprays, chlorine-containing cleaning
products, solvents, paints etc. in the vicinity of the
device or its air supply. These substances have
an adverse impact on the device and can lead to
corrosion that may result in failures.
Checking the heating water
Regularly check the water pressure of the heating
installation
Always use potable water for filling the installation.
Adding chemical agents such as frost and
corrosion inhibitors are not allowed.
If in doubt, check with the owner/service
department.