Abus RM40Li Bedienungs-, Installations- Und Wartungsanleitung Seite 33

Please note that in all other cases the muting only applies to the detector whose
test button has been pressed. The mute remains active until the alarm is automati-
cally reset. See the following table for differences in the signal when the detector
is muted.
Audible and visual signals
Mode
Standby
Testing
Smoke chamber
fault
Restforing the
factory settings
Fault in smoke
chamber
Standalone operation
Alarm
Muting the detector –
Low battery
Audible
–
3 beeps 4 times
Beeps once every
30 seconds
Short beep
Beeps once every
30 seconds
Beeps once
a second
Beeps once every
30 seconds
– 33 –
Visual
LED flashes every
30 seconds
LED flashes twice
a second
LED flashes twice
a second
LED flashes twice
LED flashes every
30 seconds
LED flashes twice
a second
LED flashes once
a second
LED flashes every
30 seconds
Putting into operation
Notes
Acoustically and
visually out of sync
Acoustically and
visually in sync
GB