Product Description And Specifications; Intended Use; Product Features - Bosch GRL 250 HV Professional Originalbetriebsanleitung

safety supervises them or has in-
structed them in the safe opera-
tion of the charger and they under-
stand the associated dangers. Oth-
erwise, there is a risk of operating er-
rors and injuries.
Supervise children during use,
u
cleaning and maintenance. This will
ensure that children do not play with
the charger.
Only charge Bosch NiCd/NiMH re-
u
chargeable batteries with a capa-
city of 9 Ah or more (2 battery
cells). The battery voltage must
match the battery charging
voltage of the charger. Do not
charge any non-rechargeable bat-
teries. Otherwise there is a risk of
fire and explosion.
Do not expose the charger to rain or wet condi-
tions. Water entering a power tool will increase the risk of
electric shock.
Charge the measuring tool only with the supplied
u
charger.
Keep the charger clean. Dirt poses a risk of electric
u
shock.
Always check the charger, cable and plug before use.
u
Stop using the charger if you discover any damage. Do
not open the charger yourself, and have it repaired
only by a qualified specialist using only original re-
placement parts. Damaged chargers, cables and plugs
increase the risk of electric shock.
Do not operate the charger on an easily ignited sur-
u
face (e.g. paper, textiles, etc.) or in a flammable envir-
onment. There is a risk of fire due to the charger heating
up during operation.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
Bosch Power Tools
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended Use

Rotary laser
The measuring tool is intended for establishing and checking
exactly horizontal height profiles, vertical lines, alignments
and plumb points.
The measuring tool is suitable for indoor and outdoor use.
Remote control
The remote control is intended for controlling the Bosch
rotary lasers via infrared.
The remote control is suitable for indoor and outdoor use.

Product Features

The numbering of the product features refers to the illustra-
tion of the measuring tool and remote control on the graph-
ics pages.
Rotary laser/charger
(1) Shock-warning function indicator
(2) Shock-warning button
(3) Status indicator
(4) On/off button
(5) Rotational operation button
(6) Variable laser beam
(7) Sensor for remote control
(8) Laser beam outlet aperture
(9) Upwards plumb point
(10) Rotation head
(11) Line operation button
(12) Battery warning
A)
(13) Battery pack
(14) Battery compartment
(15) Battery compartment locking mechanism
(16) Locking mechanism of the battery pack
A)
(17) Charging socket
A)
(18) Charger
(19) Mains plug of the charger
A)
(20) Charging connector
(21) 5/8" tripod mount
(22) Serial number
(23) Laser warning label
English | 21
A)
A)
1 609 92A 5S1 | (09.09.2020)