Cancelling The Programme - AEG FAVORIT 99025 IM0P Benutzerinformation

• If the display shows the salt mes-
sage, fill the salt container.
• If the display shows the rinse aid
message, fill the rinse aid dispens-
er.
3. Load the baskets.
7.1 Using the detergent
A B
30
20
7.2 Setting and starting a
programme
Starting a programme without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance.
3. Close the appliance door.
4. Set the programme and options
5. Press the start touchpad, the pro-
gramme starts.
• If the salt container or the rinse aid
dispenser need refilling, the rela-
ted messages will show in the dis-
play. In this case the programme
will not start. Press again the start
touchpad to start the programme.
Starting a programme with
delay start
1. Set the programme. You can also set
the applicable options.
2. Set the delay start.
3. Press the start touchpad, the count-
down starts.
• If the salt container or the rinse aid
dispenser need refilling, the rela-
ted messages will show in the dis-
4. Add the detergent.
5. Set and start the correct programme
1.
2.
3.
A
-
+
4.
C
5.
When the countdown is completed, the
programme starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the ap-
pliance continues from the point of inter-
ruption.
Cancelling the delay start
while the countdown operates
1. Press the start touchpad.
2. The display shows a message. Follow
3. When the delay start is cancelled,

Cancelling the programme

1. Press the start touchpad.
2. The display shows a message. Follow
• If you use combi detergent tablets,
activate the Multitab option.
for the type of load and the degree
of soil.
Press the release button (B) to open
the lid (C).
Put the detergent in the compart-
ment (A) .
If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.
If you use detergent tablets, put the
tablet in the compartment (A).
Close the lid. Make sure that the re-
lease button locks into position.
play. In this case the programme
will not start. Press again the start
touchpad to start the programme.
the instructions to confirm the can-
celling of the delay start.
press the start touchpad to start the
set programme.
the instructions to confirm the can-
celling of the programme.
ENGLISH
33