Care And Cleaning; To Remove And Clean The Filters; To Clean The Spray Arms - AEG FAVORIT 99001 VI Benutzerinformation

18

Care and cleaning

CARE AND CLEANING

To remove and clean the filters

Dirty filters decrease the washing results.
Although the maintenance is very low with these filters, make a check at intervals and if
necessary, clean them.
1. Turn the filter (A) counterclockwise and
remove it out from filter (B).
2. Filter (A) has two parts. To disassemble
the filter, pull them apart.
3. Fully clean the parts with water.
4. Put the two parts of the filter (A) togeth-
er and push. Make sure that they assem-
ble correctly in each other.
5. Remove the filter (B).
6. Fully clean the filter (B) with water.
7. Put the filter (B) to its initial position.
Make sure that it assembles correctly in
the two guides (C).
8. Put the filter (A) into position in filter
(B). Turn the filter (A) clockwise until it
locks.

To clean the spray arms

Do not remove the spray arms.
B
A
C