Manual Adjustment; Electronic Adjustment - AEG FAVORIT 88060 VI0P Benutzerinformation

26 www.aeg.com
German
degrees
(°dH)
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water soft-
ener manually and electronically.

Manual adjustment

Electronic adjustment

1. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
'Setting and starting a programme'.
2. Press and hold touchpads (4) and (5)
at the same time until the indicators
of touchpads (3), (4), (5) and (6) flash.
3. Press touchpad (3).
• The indicators of touchpads (4), (5)
and (6) go off.
• The indicator of touchpad (3) con-
tinues to flash.
Water hardness
French mmol/l
degrees
(°fH)
76 - 83 7.6 - 8.3
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
Clarke
degrees
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Turn the water hardness dial to the posi-
tion 1 or 2.
• The acoustic signals operate, e.g.
five intermittent acoustic signals =
level 5.
• The display shows the current set-
ting of the water softener, e.g.
= level 5.
4. Press touchpad (3) again and again
to change the setting.
5. Deactivate the appliance to confirm
the setting.
Water softener
adjustment
Manual Elec-
tronic
1) 9
2
8
1)
2
1) 7
2
1) 6
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1