Philips 32pw9768 Bedienungsanleitung Seite 24

Instant recording
&
Press the key.
REC
The recording starts immediately and a small
menu pops up where you have to enter the
duration time of the recording you want to
do.The default duration is set at 01.00 hour
but can be changed at any time.
é
Press the cursor right and enter the duration
time of the recording with the digit keys or
with the cursor up/down.
Press the key to confirm and press the
OK
key again to remove the menu.
REC
Note:
- Once the recording started, you may switch your
TV to standby or watch another programme.
DO NOT Power off your TV or else the recording
may be lost.
- See Table of Recordings how to modifiy the
programme name (Record xxx) automatically
filled in.
General remarks on Flex TV
- While a recording is in progress, and when a lock becomes active, the recording is stopped and you are
summoned to enter your code.
- The audio reproduction for Instant or Programmed Recording is always mono.
- The total number of already recorded ( in the Overview menu) + programmed ( in the Scheduled record menu)
recordings is limited to 58 programmes ( although there is still time space left). When the total number is
reached, first delete some recordings to create place for new ones.
- Pay attention not to programme overlapping recordings or recordings which start at the same time.
- When there is no free memory left, the oldest recorded programme is automatically erased and without any
warning.
- Once an Instant or Programmed Recording has started, you can start watching the programme while
the recording continues. Select the programme in the Overview menu.
To stop the recording while you are watching, first press the
press the key and select Stop on the Recording menu on screen.
REC
- Once the recording is set or has started, there is no need for the TV to remain on.You can switch the TV to
standby and the recording will happen in standby. DO NOT power off your TV.
- You can easily transfer recorded programmes to a DVD recorder or VCR, connected to
Select the programme in the Overview menu and select
- To stop an already started Programmed Record (before the entered stop time): press the
remote control and select Stop on the Recording menu on screen.
- All Flex TV featuring is not applicable on copyright protected programmes and on programmes coming from
peripheral equipment connected to
- To pause a NTSC transmission:
Select a NTSC programme and first clear the memory block with
press the Pause key.
To pause a PAL or SECAM transmission again:
Select the new programme and clear the memory block again. Then press the
22
"
Modifying the record quality of Instant
recording
Play
.
EXTERNAL 2
To stop the recording before the entered
duration time, press the
and press the key.
OK
To change the duration time, press the
key, and use the cursor keys to change the
duration time. Press the
and press the
REC
menu.
The recording duration depends on the
record quality you choose in the General
Setup menu, p. 8, to record in.
Do not change the HQ quality default setting
for the highest picture quality.
Record quality Flex TV
• (High Quality) recording quality (approx.
HQ
6 hours) can be compared with DVD.
• (Standard Quality) with a quality still
SQ
better than VHS but a longer record duration
(approx. 11 hours).
• (Long Play) (approx. 28 hours).
LP
key on the remote control.Then
LIVE
. You record what you are watching on the screen.
in the Features menu. Then
Pause clear
Pause
key, select
REC
REC
key to confirm
OK
key again to remove the
.
EXT 2
key on the
REC
key.
Stop