JVC HV-32D25EU Bedienungsanleitung Seite 37

2 Press the green button to set the
DIGITAL-IN
Pressing the green button repeatedly until
the mark which is the same as the type of
cable connected to the DIGITAL AUDIO
IN terminal is selected.
: Select this mark when connected
with coaxial cable.
: Select this mark when connected
with optical cable.
To cancel the DIGITAL-IN setting:
Press the green button to turn off the mark
of DIGITAL-IN.
3 Press the a a a button to complete a
the setting
The menu disappears.
• DIGITAL-IN cannot be set for the TV
terminal and EXT-5 terminal.
• This TV does not work with digital
audio signals other than Dolby Digital
audio. If no sound is emitted from the
speakers, cancel the DIGITAL-IN
setting and change to normal analog
sounds.
ID LIST
You can have a name corresponding to the
devices connected for each EXT terminal.
Giving a name to an EXT terminal makes the
EXT terminal number appear on the screen,
together with the name.
1 Choose an EXT terminal
2 Press the blue button to display the
name list (ID LIST)
EXT SETTING
EXT-1
EXT-3
EXT-5
TV
BACK
TV
OK
D0021-EN
ID LIST
VHS
DUBBING
S-VHS
EXT-2
DVC
SAT
STB
GAME
EXT-4
LD
DVD
8mm
Hi-8
3 Press the 6 6 buttons to choose a
6 6
name. Then press the a
The ID LIST disappears and the name is
assigned to the EXT terminal.
• You cannot assign an EXT terminal
name not found in the name list (ID
LIST).
To erase a name assigned to the
EXT terminal:
Choose a blank space.
4 Press the a a button to complete
a a
the setting
DUBBING
You can choose a signal source to be output
from an EXT-2 terminal.
You can choose any one of the output signal
of the device connected to the EXT terminal
and the picture and sound from a TV channel
you are currently viewing to output it to the
EXT-2 terminal.
1 Press the 5 5 buttons to choose
5 5
the arrow from the menu
EXT SETTING
EXT-1
EXT-3
EXT-5
TV
BACK
TV OK
D0022-EN
2 Press the 6 6 buttons to choose an
6 6
EXT terminal or TV.
Then press the a a button
a a
The arrow in the menu represents a signal
flow. The left side of the arrow denotes a
signal source output from the EXT-2
terminal.
EXT-1/EXT-3/EXT-5:
The output signal of the device connected
to an EXT terminal passes through the TV
and is output from the EXT-2 terminal.
Using the TV's menu
a button a a
DUBBING
EXT-2
EXT-4
35