ATH-Heinl W142 Bedienungsanleitung Seite 85

2.9.5.
Fix the monitor holder to the housing using the
four screws provided.
Remove the two upper screws on the cover of the
holder in order to guide the connecting cables
through the inside cable channel.
Connect the cables to the machine.
Next, fix the monitor to the holder using the
screws provided.
Then connect the monitor.
Finally, both upper screws on the holder can be
reattached.
2.9.6.
Remove the fixing screw on the side of the
wheel lift.
Slide the access ramp onto the screw from the
front.
Then secure the ramp using the screw.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Assembling the monitor
Assembling the access ramp
Manufacturer ATH-Heinl GmbH & CO.KG
- 27 -