ATH-Heinl W142 Bedienungsanleitung Seite 82

2.9.2.
Drill holes, observing the necessary drill depth A
and drill diameter of the dowel manufacturer.
Insert the anchor bolts into the holes up to the
appropriate depth.
The balancing machine must be anchored on the floor in order to achieve a precise balancing result.
2.9.3.
Follow the 8-pole ribbon cable (for the keyboard)
and prepare the end that is not connected.
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Securing using the safety anchor
Assembling the weight storage
Manufacturer ATH-Heinl GmbH & CO.KG
- 24 -
Clean out the inside of the holes.
Tighten the nuts to the torque specified by the
manufacturer.
Clamping thickness B varies depending on the floor
covering.