ATH-Heinl W142 Bedienungsanleitung Seite 69

1.3.5 Starting the balancing process
Start the balancing process using the
STARTbutton or by closing the wheel protector
Turn the wheel until all the diodes on the display
light up
The weight must then be applied to the wheel.
The machine provides you with the following aids
to ensure precise positioning:
Internal
Programme
weight
12 o'clock
DYN position
(laser)
STA 12 o'clock position (laser)
12 o'clock
ALU1 position
(laser)
12 o'clock
ALU2 position
(laser)
Weight
recording on
ALUS
the gauge
arm
a) HID function
The HID function allows you to position the external balancing weight in a hidden spot behind the
spokes.
This function is available in ALU2 and ALUS mode.
After the balancing process, the HID programme
can be selected by pressing the T + MODEL
buttons
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
External
weight
12 o'clock
position
12 o'clock
position
Weight
recording on
the gauge
arm
Weight
recording on
the gauge
arm
Manufacturer ATH-Heinl GmbH & CO.KG
- 11 -
/
+