ATH-Heinl W142 Bedienungsanleitung Seite 84

2.9.4. Assembling the wheel protector
Unpack the wheel protector and place it next to the
machine
Now remove the fixing screw from the mounting
shaft of the switch mechanism.
Next slide the main entry onto the shaft and secure
this.
Then, take the turner and secure this on the entry
above it.
Finally, fix all the screws in place
® Copyright ATH-Heinl GmbH & Co. KG, All rights reserved / Misprints and technical changes reserved / As of: 2020-03
Manufacturer ATH-Heinl GmbH & CO.KG
- 26 -