Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. The basket is transformed into a seat by putting together the belts located at the lower end of the seat and
legs. (Photos 18;19) Turn the basket into a sitting position by pressing simultaneously the side buttons.
(Photo 20)
After positioning the basket apply the anti-shake hook (Picture 21; 22; 23)
Warninig: Always release the locking hook before adjusting the basket!
Damages of the basket adjustment mechanism due to incorrect performance are not subjects of the
warranty.
2. Place the foot cover and attach the zipper.
3. To place the stroller in a stationary position, use the rear wheel brakes, by pressing the brake pedal located
on the rear axle. (Photo 2 .1)
WARNING: The parking device does not guarantee an optimal hold in steep slopes. Therefore never
leave the stroller on a sloping ground with a child sitting or lying in the stroller!
4. While moving the stroller along rough and uneven surfaces you can use the option of movement in a
straight line by pressing the blocking cog on the front wheels. Picture 26.1
To release the front wheels,
5. For a change (lowering) the sunshade position, take its upper part and pull down to the desired position.
(Photo
27
)
6. Adjusting the backrest - To raise the backrest, pull out the belt.
squeeze the buckle button and release the backrest down. Picture 28.2
7. When using the seat for a child 6m+ obligatory fasten the safety belts.
8.
Put the shoulder and waist belts together and place them in the central buckling clasp. (Photos
Regulate the length of the safety belts by pulling the clasps all the way. (Photo
the button on the central clasp. (Photo
9. Install the cup holder on the frame of the stroller. Picture 33
10. Mounting of the car seat - Put the adapters (included in the set Photo 1, position 12) into the holes on both
sides of the seat, taking into account the difference for the left and right side. (Photo 38) Insert the legs of the
adaptors into the openings of the plastic holders on both sides of the frame. (Photo 39) A click will signal that
the seat has been secured.
11. Unmounting of the car seat - Push simultaneously the buttons at both sides of the adaptors and lift the car
seat from the stroller frame . (Picture 40) To unmount the adaptor from the car seat - catch the adaptor with
hand and with thumb press the button and pull out the adaptor . (Picture 41)
1. Activate the stroller brakes.
2. Fold the sunshade to the maximum.
3. Remove the basket Picture 11
4.
Pull the security button to the side press the
5. The correctly folded stroller should look like the image in photo 36;37.
EXPLOITATION
5
To release the brake, lift the brake pedal with your leg .
lift the locking cog .
32
)
,
(Photo
26.2 )
(Photo
FOLDING
button
on the handle
11
(Photo
28.1 ) To release the backrest,
31
) To unlock the belts, press
and pressing down.(Photo 34;35),
25
.2)
29;30
)
Werbung
Inhaltsverzeichnis
