Intended Use - DeWalt D25981 Originalanweisungen

EngLIsh
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
Wear ear protection.
Wear eye protection.
Date Code Position (Fig. A)
The date code 17 , which also includes the year of manufacture,
is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
On/off switch
1
Side handle(s)
2
Tool retainer
3
Tool holder
4
Optional accessories (Fig. C)
Various types of 28 mm hex. chisels are available as an option.
Pointed chisel
5
Cold chisel
6
Scaling tool
7
Spade chisel
8
Asphalt cutter
9
Driver ground rod
10
Shank tamper
11
Plate tamper
12
Consult your dealer for further information on the appropriate
accessories.

Intended Use

Your breaker has been designed for professional heavy duty
demolition, chipping and chasing applications in concrete, brick,
stone and other masonry materials.
DO nOt use under wet conditions or in the presence of
flammable liquids or gases.
These breakers are professional power tools.
DO nOt let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
Young children and the infirm. This appliance is not
•
intended for use by young children or infirm persons
without supervision.
• This product is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
18
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this product.
Soft Start Feature
The soft start feature allows the impact rate to build up more
slowly, thus preventing the chisel or point from "bouncing"
around on the masonry when starting up.
Fully Vibration-dampened Handles (Fig. A)
The dampers in the handles 2
transmitted to the user. This improves user comfort during the
operation.
Active Vibration Control
The active vibration control neutralises rebound vibration from
the breaker mechanism. Lowering hand and arm vibration, it
allows more comfortable use for longer periods of time and
extends the life of the unit.
ASSEMBLY AND ADJUSTMENTS

WARNING: To reduce the risk of serious personal
injury, turn tool off and disconnect tool from power
source before making any adjustments or removing/
installing attachments or accessories. Be sure the
trigger switch is in the OFF position. An accidental start-up
can cause injury.
Inserting and Removing 28 mm Hex
Accessories (Fig. D–F)
This machine uses chisels with a 28 mm hex. shank. We
recommend to use professional accessories only.

WARNING: Since accessories other than those offered
by D WALT have not been tested with this product,
e
the use of such accessories may entail hazardous
situations. To reduce the risk of injury, use only accessories
recommended by D WALT.
e
Clean the chisel shank.

WARNING: Do not apply lubricant to the machine.
To fit a chisel with groove in the shank,
proceed as follows (Fig. E)
1. Pull the tool retainer 3 to the unlock position.
2. Hold the chisel in front of the tool holder with the groove
facing upwards.
13
3. Insert the chisel shank into the tool holder
4. Push the retainer 3 backwards to lock the accessory in
position.
To fit a chisel with collar on the shank,
proceed as follows (Fig. F)
1. Pull the tool retainer 3 to the unlock position.
2. Insert the chisel shank into the tool holder
3. Push the retainer 3 in line with the accessory shank to lock
the accessory in position.
absorb the vibrations
4 .
.
4