Herunterladen Diese Seite drucken

Danfoss AKV 10-1 Installationsanleitung Seite 2

Elektrisches expansionsventil

Werbung

Warning
Never switch on power to the coil when
the coil is dismounted from the valve.
Otherwise the coil may be damaged and
there is risk of injuries and burns.
2
Clip-on coil
(en-gb) Do not insulate
(da)
(de)
(fr)
(es)
en-gb
The gasket must
be exchanged,
if the valve is
dismantled
DKRCC.PI.VA1.A5.53 / 520H7550
Må ikke isoleres
Nicht isolieren
Ne pas isoler
No encerrar
paraevitar condensación
da
de
Pakningen
Bei Zerlegung des
skal skiftes,
Ventils muß die
hvis ventilen
Dichtung ausge-
adskilles
wechselt werden.
45 Nm
fr
es
Es preciso
Changer le joint
chaque fois
cambiar la junta
que la vanne est
si se desmonta
démontée
la válvula
© Danfoss A/S (AC-MCI sw) 2013-04

Werbung

loading

Diese Anleitung auch für:

Akv 10-2Akv 10-3Akv 10-4Akv 10-5Akv 10-6