Bartscher IK 27TC Original-Gebrauchsanleitung Seite 41

The buttnons
•
the range from 60 °C to 240 °C.
The following temperature settings are available:
60, 80, 100, 120, 140, 160, 180, 200, 220 and 240 °C.
Timer function
After selecting the type of operation (power or temperature mode), press the button
•
to access time settings. „0" will appear on the digital display and the time mode LED
indicator will come on (
Using the button
•
In 1-minute intervals within the range from 1 to 30 minutes and in 10-minute
intervals within the range from 30 to 180 minutes.
The selected time of operation is counted down in 1-minute intervals, whereas the
•
digital display returns to the previous indications: power or temperature is shown.
When the time has run out, an audio signal will sound and the device will
•
automatically switch off.
When the device has been switched off, a cooling fan will continue working for some
•
time and then it will switch off.
In order to stop the timer berfore the set time has expired, press ON/OFF button
•
Press this button again to switch on the device.
NOTE!
During the operation, the time may be changed at any moment using the
buttons or
or temperature to remain unchanged.
Power or temperature level may be seet in the same way without changing
the set time. The device will then function according to the most recent
settings.
When cooking or heating is finished, disconnect the device from the socket
•
(pull the plug).
NOTE!
The induction cooker switches off automatically if the user does not change
any settings during 2 hours or if the time exceeding 120 minutes has been set.
or can be used to change the temperature within
).
or you may now set the required cooking time
. The memory function of the device allows for the set power
,
.
- 37 -